
Low-E Contact Meter
- ↩️ Ventes finales
- 📐 Vous achetez pour tout un projet? Utilisez un calculateur ou demandez un métré
The CM1030 is a simple instrument that detects any conductive surface, including Low-E coatings on single sheets of glass. The tester has 4 non-scratch pads on the back-side of the meter that allow you to test for conductive coatings. Simply press the meter against a piece of glass to determine if the surface you are touching contains any conductive (Low-E) coatings. Unique design allows you to easily test hard coat (pyrolytic) or soft coat (sputter) Low-E coatings. Because of the ultra-sensitive design, the meter is even capable of detecting most coatings that are protected by a thin protective dielectric coating. To operate the meter, simply press the back side of the meter against the glass. If you are touching the conductive Low-E coating, the indicator will light to signal the coating is on the top surface. A battery test push-button is included for your convenience. This item is priced on request: tell us the quantity you need and we'll email you a price.
| Vendu | chacun |
Livraison
Ramassage gratuit à Mississauga, ou livraison à votre porte.
La livraison est tarifée selon les taux de transporteur en direct pour votre adresse — entrez-la à la caisse pour voir le coût exact. Le ramassage gratuit est toujours offert à notre entrepôt de Mississauga.
Retours
Toutes les ventes sont finales : les matériaux de construction ne peuvent être ni retournés ni échangés. Les livraisons endommagées ou incomplètes signalées dans les 48 heures sont remplacées ou créditées. Consultez la politique de retour.






