ShopReno
Lamello Invis Mx2 Connecting Fittings - Starter Kit
Lamello

Lamello Invis Mx2 Connecting Fittings - Starter Kit

UGS SR-RXB7F26763
Prix sur demande
Demander un prix

Ce produit est offert sur demande. Dites-nous la quantité et nous vous enverrons un prix.

Magnet-driven connecting fittings. The Invis Mx2 is a unique, magnet-driven furniture connector for the highest demands in terms of aesthetics, stability, and productivity. With no visible openings, the Invis Mx2 is quickly connected and disconnected via its magnet drive. The rotating MiniMag tool drives the screw inside the connector contact-free and invisibly. Requires two Ø 12 mm holes in both workpieces for preparation. You can use a stationary drilling machine, a CNC machining center, or the Rasto drilling jig supplied in the starter set for these holes. Holes to be drilled with precision. The scope of delivery includes an insertion jig to vertically screwing the insertion nut in and out. The Invis Mx2 connector is screwed in without an insertion jig and automatically aligns itself vertically due to its length. The MiniMag and a cordless drill close the joint and apply a joint clamping force of up to 250 kg per connector. To achieve this high clamping force, the magnet-driven connector must be installed as close to the panel surface as possible. The distance from the outer edge to the center of the connector must not exceed 15 mm. The detachable furniture connector opens when the direction of rotation on the cordless drill is changed. The connector is ideal if clamps or other clamping aids would leave marks on components with a high-gloss finish or would slip off molded workpieces. The Invis Mx2 is also used to secure access flaps or to screw the last workpiece of a larger piece of furniture so that it's invisible. This item is priced on request: tell us the quantity you need and we'll email you a price.

Plus de Quincaillerie et fixations