ShopReno
Grabber Wafer Head Self-Drill Screws #8 x 1/2 in. (10,000-Pack)
Grabber

Grabber Wafer Head Self-Drill Screws #8 x 1/2 in. (10,000-Pack)

UGS SR-C12535
Prix sur demande
Demander un prix

Ce produit est offert sur demande. Dites-nous la quantité et nous vous enverrons un prix.

Designed for heavy gauge metal applications where low profile head exposure is desired. The wafer head provides a greater bearing surface than pan or hex drillers. For 20-12 gauge steel, with a #2 Phillips recess, single lead thread and clear zinc coating. Use with a standard screw gun with a depth-sensitive nose piece. • Designed for heavy gauge metal applications where low profile head exposure is desired. Wafer head provides a greater bearing surface than Pan or Hex Drillers, with a low-profile head exposure. For 20-12 gauge steel. Specifications: Gauge: #8 Length: 1/2-in Head Type: Wafer framing Recess Type: #2 Phillips Thread Type: Single lead Coating: Clear zinc Installation Guidelines: Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 2,500. The wafer head is fully seated when the head is flush with the work surface. Overdriving my result in fastener failure or strip out of the work surface. The fastener must penetrate beyond the metal three full thread pitches. All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C954, as referenced in ICCES report ER-5280 and ESR 1271, are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012. This item is priced on request: tell us the quantity you need and we'll email you a price.

Plus de Quincaillerie et fixations