
Cove Bit, 1/2 in, 1/2 in, 1/2 in, 2 1/2 in
- โฉ๏ธ All sales final
- ๐ Buying for a whole project? Use a calculator or request a takeoff
Choose an option (4 options)
The covetto form -- produced by the cove bit -- is one of the classic building blocks for many molding profiles. Use it alone or in combination with beads and fillets. Use the cove to detail the edges of casework, doors and drawers, posts and columns. The cove also makes up one-half of the rule joint used on drop-leaf tables, the other half is the corner-round. For best results with a large radius cutter, make a preliminary cut with a smaller radius bit or chamfer the workpiece to reduce the amount of stock to be removed in the finish pass. This will produce a smoother finish and prolong tool life. The largest diameter bits must be run at reduced speed. Use in a handheld or table-mounted router. This item is priced on request: tell us the quantity you need and we'll email you a price.
| Tool | Router |
| Length | 2 1/2 in |
| Radius | 1/2 in |
| Diameter | 1 3/8 in |
| Material | Carbide Tipped |
| Application | Profiling and Rabbeting |
| Shank Diameter | 1/2 in |
| Cut Profile Radius | 1/2 in |
| Sold by | each |
Delivery
Free pickup in Mississauga, or delivery to your door.
Delivery is priced by live carrier rates for your address โ enter it at checkout to see the cost. Free pickup is always available at our Mississauga warehouse.
Returns
All sales are final: construction materials can't be returned or exchanged. Damaged or short deliveries reported within 48 hours are replaced or credited. See the full returns policy.






